Emblaze-VCON VCB5 Guia do Utilizador descarregar pdf (Página 16)

2 Defining the VCB IP Configuration

8 Emblaze-VCON VCB5 User’s Guide

Through the Console Port

The following procedure describes how to access the VCB’s configuration directly

through the

Console

(or serial) port.

³ To define a static IP address

1 Connect a control cable between the VCB’s Console port and the remote

computer’s COM port.

2 Connect a network cable to any one of interfaces

GbE1

GbE3

3 Using Microsoft

HyperTerminal or a serial connection program, open a

connection between the computer and the VCB unit. Configure the

connection settings as follows:

4 Wait for the command prompt (>) to appear on the computer screen.

5 Type listip next to the command prompt.

Connect using: COM1 (or any other free COM port)

Bits per second 9600

Data bits 8

Parity None

Stop bits 1

Flow Control Xon/Xoff

From the CONSOLE port to

your computer’s COM port

From any one of these

interfaces to the network

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Sem comentários

Emblaze-VCON VCB5 Guia do Utilizador Página 16