
Chapter 15 Troubleshooting
Emblaze VCON HD3000 User’s Guide 149
If the problem you are trying to solve is not described in the Diagnostics dialog, try
to find the solution in the following sections.
15.2 Starting HD3000 .
T If you have a problem with the Phone Book, you can erase it
completely, by pressing the green ERASE PBK SoftKey.
A confirmation message appears. Click OK if you are sure you want to
erase all Phone Book entries.
T You can restore the factory-set defaults for the system, by pressing the
blue LOAD DEFAULTS SoftKey.
A confirmation message appears. Click OK if you are sure you want to
cancel all changes made to the HD3000 options and settings and restore
the original defaults.
HD3000 restarts.
T To restart the system, press the yellow REBOOT SoftKey.
Condition Solution
The HD3000 starts up
slowly.
T Verify that the LAN cable is connected by the
following methods:
— Check that the green LED underneath the
LAN connector on the rear panel is on.
— Press <Status> and then the green
DIAGNOSE SoftKey to check the LAN
speed.
After loading, video from
the camera is visible but
the menus and address
books are not.
3. Make sure that the HD3000 is connected to your
monitor’s S-Video In connector.
-or-
If the TV only has a Composite Video In
connector, connect it to the HD3000’s VCR
Video Out connector.
OK
OK
Comentários a estes Manuais